Skip to content

Straight talk about your car's repair, like a neighbor

(559) 468-3243
(559) 468-3243

ServicesBumper Repair

Bumper Repair in Kerman

A lot of bumper damage looks worse than it is. We repair cracked, scuffed and pushed-in bumper covers at our shop, check the parts hiding behind them, and give you a straight answer on whether a repair or a new cover is the better choice for your car.

Technician sanding a cracked, partly primed bumper cover on a rolling stand in a body shop bay, with a damaged car and paint booth behind

What bumper repair really involves

The bumper you see is usually a plastic cover. Behind it sits a foam or plastic energy absorber and a metal reinforcement bar bolted to the frame rails. A low-speed bump in a parking lot can leave the cover looking fine while a mounting tab has snapped, or it can scuff the paint badly while everything underneath is untouched. We look at both before we tell you anything.

Plastic covers can often be repaired. Cracks and torn tabs can be plastic welded from the back, gouges filled with a flexible filler, and the area refinished with paint that is made to bend with the cover instead of chipping off it. When a cover is torn through, badly stretched or missing large pieces, a new one is the better buy, and we will say so.

We treat your car the way we would want a neighbor to treat ours: no padding the job, no talking you into a part you do not need. Drivers bring bumpers to us from Kerman and from towns like San Joaquin and Mendota, and the approach is the same for every one of them.

Estimator photographs front-end damage on a gray SUV with a tablet as the owner watches on a body shop's concrete lot, with repair bays behind

What we do on a bumper repair

  1. 01

    Removing the cover for a real look

    We take the cover off when the damage calls for it. That is the only way to see broken clips, a crushed absorber or a bent reinforcement bar. You hear about what we find before any extra work starts.

  2. 02

    Plastic welding cracks and tabs

    Cracks and broken mounting tabs are welded from the inside with matching plastic, then reinforced. A bumper held on with fresh tabs sits flush again instead of sagging at the corner.

  3. 03

    Reshaping pushed-in areas

    Many plastic covers can be warmed and pushed back into shape if the material has not torn. It saves the cost of a new cover when the plastic is still sound.

  4. 04

    Prep and flexible refinishing

    Bare plastic gets an adhesion promoter, then primer and paint with flex additive so the finish moves with the bumper. We blend into the fender and hood edges so the color does not stop at a line. Our Paint and Refinishing page covers color matching in more detail.

  5. 05

    Sensors, lights and fit

    We reconnect parking sensors, fog lights and trim, and check that the gaps to the fenders and headlights are even. If your vehicle has driver-assist sensors behind the bumper, we tell you up front whether they will need to be aimed after the repair.

Questions about Bumper Repair?

Call(559) 468-3243

Signs your bumper needs attention

  • A corner is hanging or loose

    A gap that opens when you press on the bumper usually means a broken tab or clip. Left alone, it can catch the wind on the highway and tear further.

  • Cracks spreading from a scuff

    A small crack in plastic tends to grow with heat, cold and road vibration. Fixing it early often keeps it a repair instead of a replacement.

  • Paint peeling or flaking

    When paint lifts off a bumper, it often started at a chip or a stress line. Long summer heat in the valley speeds it along, and bare plastic fades fast.

  • Parking sensor warnings

    A sensor that beeps nonstop or not at all after a bump may have been knocked out of position or had its wiring pinched.

  • Uneven gaps after a minor hit

    If the bumper no longer lines up with the headlight or fender, something behind it has likely shifted. It is worth a look even when the cover itself is unmarked.

How a bumper job runs at our shop

  1. 1

    Start with a phone call

    Tell us what happened and what you see. We will set a time for you to bring your car in so we can look at it properly.

  2. 2

    Inspection and a clear estimate

    We look at the cover and, when needed, behind it. You get the estimate line by line, with a plain answer on repair versus replace and why.

  3. 3

    The repair itself

    We weld, reshape or replace the cover, fix any damaged mounts and absorber, then prep and paint. If we find something hidden once the cover is off, we call you before doing anything about it.

  4. 4

    Fit check and handoff

    We reinstall everything, test the sensors and lights, and check the color in daylight. When you pick up your car, we walk you through what was done.

What affects the cost of bumper repair

Bumper work ranges from a quick scuff refinish to a new cover with sensors and paint. The price depends mostly on what is damaged and what is behind it. We explain each line on the estimate so nothing on the final bill is a surprise.

Repair or new cover
Welding and reshaping an existing cover is usually less than buying a new one, as long as the plastic is not torn through or stretched.
Hidden damage behind the cover
A crushed energy absorber or bent reinforcement bar adds parts and labor. We show you what we found before it goes on the bill.
Sensors and built-in features
Parking sensors, fog lights, cameras and radar units add parts, wiring and sometimes aiming after the repair.
Paint and blending
Bright tri-coat colors and pearls take more steps to match than solid colors, and blending into nearby panels adds time.

Bumper repair questions

Can a cracked plastic bumper really be repaired?

Often, yes. Cracks and torn tabs can be plastic welded from the back and reinforced, then refinished. If the crack runs through a large area or the plastic is stretched and brittle, a new cover is the better choice and we will tell you that.

Will the new paint match the rest of my car?

We match to your car's paint code, then adjust and blend into the panels next to the bumper so the color reads as one piece. Plastic and metal can look slightly different under the same paint, which is why we check it in daylight before you pick up.

Should I go through insurance for a bumper?

It depends on the damage, your deductible and who caused it. We can give you our estimate first so you can decide. If you file, our Insurance Claims page explains how we work with your insurer.

How long will my car be at the shop?

A scuff or small crack can be fairly quick, mostly limited by paint curing time. A new cover depends on how fast the part arrives. We give you a realistic timeline with the estimate and keep you updated if it changes.

What if there is damage beyond the bumper?

A harder hit can bend the reinforcement bar or shift frame rails. If we see that, we explain it and handle it through our collision repair or frame straightening work, with your okay first.

Gray SUV parked on a wet concrete lot outside a metal body shop, with open bays, a masked car ready for paint, and a front-damaged car nearby

Get that bumper sitting right again

Tell us what happened and we will set a time to look at your car. You will get an honest answer on repair or replace before any work starts.